欧美怡红院视频一区二区三区_中文日韩字幕一区在线观看_国产精品免费视频一区_成年人免费黄色

【Scope of Application】

It is used to adjust the temperature and humidity of various textiles before testing the physical and mechanical properties.

【Related standards】

GB6529 ASTM D 1776, etc.

【technical parameter】

1. Test environment conditions: when the ambient temperature is +5~+28℃, the relative humidity is ≤85%, and there is no sample in the test box

2. Temperature range -(40)℃～+150℃

3. Control accuracy Temperature: ±0.2℃ Humidity: ±2.5% (refers to the difference between the set value of the controller and the actual measured value of the controller)

4. Temperature fluctuation: ≤0.5℃ (the temperature fluctuation is half of the difference between the highest temperature and the lowest temperature measured at the center point)

5. Temperature error: ≤±1℃ (the average temperature displayed by the studio temperature controller minus the average temperature measured at the center point)

6. Temperature uniformity: ≤2.0℃ (temperature uniformity is the arithmetic mean of the difference between the highest temperature and the lowest temperature measured in each test)

7. Heating time: 3℃/min (non-linear no-load)

8. Cooling time: 0.75~1℃/min (non-linear no-load)

9. Nominal internal volume: (80)

10. Inner box size: W(400)mm × H(500)mm × D(400)mm

11. Dimensions: W(600)mm × H(1410)mm × D(1070)mm

12. Weight: (200)KG